12 Best LED Grow Light Stands in 2024

Buying Guide Questions

Where should you put a grow light?

Grow lights should be placed directly above the plants because it mimics natural sunlight from above. If you use incandescent bulbs, don’t put them too close to the plants as they will burn the plants. Generally, incandescent should be at least two feet from the plants.

Fluorescent and LED bulbs dissipate less heat and can be placed about a foot and six inches from the plants, respectively. As your plants grow, you will need to adjust the placement of lights to maintain the appropriate distance from the plants.

If you want a technical and more accurate placement of grow lights, you need to find something called the PAR value of your led grow lights with a PAR meter. The PAR meter measures the intensity of light available to plants. Plants get proper light at PAR of between 500 and 1000. Place your PAR meter where you intend to put the plants and change the light source’s position until you get the desired PAR value.

What are the best tabletop grow light stands?

The tabletop grows light stands are small and compact frames that provide all the regular grow light stand benefits. We have reviewed the best tabletop grow light stands, so the best depends on your wallet and need. They come in various sizes, types of light, aesthetics, and functionality.

What to Look for When Buying Grow Light Stands?

There are various types of grow light stands, and they come in a variety of sizes and functionality. The first thing to consider when getting a grow light stand is the space available to you. You don’t want to get something too big for the area. Then consider the plant you will be growing; small plants need only small stands, while fruits and vegetables will require relatively larger frames or multi-tier ones.

Wattage

The wattage required depends on the plants’ size and the area they cover, and the size of your grow room. If you have a small grow room, you will need relatively low wattage compared to when the room or plants are large. Large grow rooms require several wattages, which can even run into several light strips. Be sure to calculate the wattage needed per square area covered by the plant.

Quality

Another essential thing to consider is the quality of materials used to build the stand and the quality of the LED lights. Check of the build of the frame is sturdy and made from durable materials. Also, check the lifespan of the bulbs. Usually, the LEDs should last for several years, so be sure you check the lifespan of the lights included. If you know anyone who has bought the stands, you can confirm the durability or check customer reviews.

Light spectrum

Plants need blue and red wavelengths of light for proper growth, which is essential that you get lights with a full spectrum that will cater to your plants from germination to flowering and budding.

Blue light has a wavelength of 440nm to 450nm; RED light is 620nm to 660nm and 730nm for far Red spectrum; Orange light has a range of 605nm to 610nm. Ultra Violet light has a wavelength of 380 to 410nm.

Your crop’s blue wavelength is needed during the vegetative and germination stages, while red light is suitable for the flowering phase. However, you must give your plants various light spectrums for healthy growth.

Energy Consumption

Your plants can be exposed to light as long as possible, except in cases of plants that have photoperiodism. However, because of electricity costs, lights are generally left on for 12 to 14 hours. It is advised that you go for lamps with low wattage or have energy savings function, especially when you are a hobbyist or own a small plant.

Another aspect of energy consumption to consider is heat emission. Lights that give off too much heat will burn your plants. Lamps that are rated highly may give off high levels of heat compared to energy-saving lights. If you want Grow Lights, be sure to check out the Best CFL Fluorescent Grow Lights

What Type of Light Do Plants Need for Growth?

Growing plants indoors sometimes don’t get the required amount of light as plants outdoors, where grow lights come in. Grow lights can be red or blue or full spectrum. Whole spectrum light is the best for the plant as it mimics light from the sun. Different plants require an additional amount of red and blue lights, so be sure to carry out your research to find the ratio to mix your lights. You should note that red or blue light doesn’t refer to the color of the lamps, instead of the wavelength of the light.

You can get incandescent lights, CFL, and LED lights for your to grow stands. Incandescent lights give whole spectrum light. However, they get hot and cause damage to plants. They are not energy efficient and will cost a lot in electricity bills. CFL and LED lights are cheaper and more efficient than the incandescent bulb, with the LED lights being the most economical and efficient light source for your grow room. Check out the Best Grow Light Bulb

If you are wondering if your plants are getting enough light or not, look out for the following signs:

• Wilting and dying lower leaves
• Reduced flowering
• Stunting of new growth
• Spindly stems
• Lack of vibrant color, or no color in plants that should otherwise look luscious

Can a Plant Get too Much Light?

While you often expose your plants to as much light as possible, it gets to the point of saturation where extra light isn’t beneficial. Some plants do not need too much light, so leaving the lights on long will only cause you to spend more money.

Damage to plants from light is caused when the rays of light are too intense, while too much light can mess with the growth cycle of your plants. A high-intensity light causes the plants to heat up, which causes the plant to use up its water reserve to cool itself down, which invariably leads to the plant is dehydrated.

Plants can grow under continuous exposure to light for an indefinite period, but some plants exhibit photoperiodism in which they need long periods of darkness to germinate. Also fascinatingly, plants grow faster at night.

Watch out for wilting, brown leaves, and patches on the plant to identify overexposure to intense light. Also, the pale yellowing of the plants and leaves is a sign that something is wrong with the plant.

What is a Grow Light Stand Tier?

When you are researching the grow light stand to buy, you probably came across products labeled something like 4 tier grow light stand, and you are wondering what it means.

The tier simply refers to the levels on the stand. A 2 tier grow light stand will have two-level or shelves where you can place your trays or pots. If you have many plants, but you don’t have too much horizontal space, you can go for grow light stands with high tier numbers up to four.

Getting a high-tier to grow light stand isn’t advisable if you do not have plants that will go into the shelves. If you are a hobbyist, then a single or two-tier stand is good enough for you.

Why Use an LED Stand instead of Wires?

The primary reason for using stands is to eliminate the risk of electric shocks. Safety should always be a priority when setting up a grow room or growing plants indoors, which is why Grow Stands are preferred. Stands eliminate the need for lots of wires, which will be hard to troubleshoot in case of faults.

Wiring is reduced when you use grow stands, which makes you grow space tidy and aesthetically appealing. Organizing is more straightforward with frames, as you can use multiple tier stands. Brackets will save you a lot of space because you can stack various plants.

How to Setup your Grow Light Stand?

After purchasing your grow light stand, look into the packaging. It should come with a manual. Grow light stands are relatively easy to set up, and many manufacturers include all you need to set them up. Some brands are plug-and-play and don’t need extra equipment to set up. However, in some cases, you may need the following to set up your grow light stand:

• LED lamp holders
• Power Cord
• T-joints and elbows
• Flexible gooseneck
• Sockets

Conclusion

Grow light stands are versatile additions to your indoor garden, and they come in various sizes and offer almost the same functionality. They help you arrange your plants and supply light to help them grow. Before setting up your Grow Light Stands, ensure the lights are of the correct spectrum needed for your plants to grow correctly.

You can also use LED Grow Light Strips in your grow rooms.