Morsen MAX12 Review

If you’re looking for a useful LED grow light to use with your cannabis plants, you’ll want to check out the Morsen MAX12. This light has many great features built into it to ensure your plants grow well. This article will highlight the Morsen MAX12 and inform you more about it so you know how it can help your plants grow strong and produce a bountiful harvest.

The Morsen MAX12


This product runs on 3600W which features a full spectrum of colors. You’ll find blue, red, UV, and IR lights built into it which will help your plants to receive an adequate amount of light depending on its growth stage. These 3600W lights are broken up into 12 300W LED chips. You’ll also find a COB chip in this model which helps it to maintain a uniform light color as it runs. An on/off dimmer switch is also located on this product and will allow you to dim the lights during the night or when you want to give your plants a slight break from them.

There are UL certified fans built into this product. These fans are useful as they will help to prevent overheating from occurring when the lights shine on your plants. They are also very quiet when running so you won’t need to worry about them being loud.

You’ll also find a built-in heat sink with this light panel which is covered with an aluminum casing. This casing will help to prevent overheating from occurring which could otherwise destroy your plants.

The ideal height to hang this lighting product above your plants is about 3-4 ft. This is high enough to help prevent burning the leaves and buds of them but not too high which might end up leaving your plants cold. However, as your plants grow, you can easily adjust the hanging height to the height that is best for your plants.

This model is built with a 5 ft. power cord which is a reasonable length for one of these products. It comes with a 3 year warranty and also a hanging hook. While it might be a little expensive, it’s still worth investing in thanks to its high-quality materials and safety features.

What is a COB Chip?

As mentioned in the review above, this product, as well as many other light panels, have COB chips built into them. COB chips, which stand for Chip on Board, are often used in LED lights that feature many diodes. The COB chips help these LED lights to better reach your plants so they can grow and stay warm. COB chips will work to cover your plants entirely in light so they grow well.

How Long Should I Leave This Light Panel Running?

Finding the right running time for light panels can be tricky. Some models need to run longer compared to others. The Morsen MAX12 usually should be on for about 9-12 hours when your plants are in their flowering stage. As they reach their fruiting stage this time should be reduced to about 7-8 hours. However, be sure to look at your own plants and adjust this time if necessary to ensure your plants receive the right amount of light.

What is a Heat Sink?

A heat sink is created to help absorb heat. These are very useful for products such as the Morsen MAX12 because the lights can get to be very hot. While your plants need to have a warm light on them often, sometimes the heat can eventually hurt them. To help prevent this, heat sinks are often built into LED grow lights to help prevent overheating in your growing space which allows your plants to be in a more comfortable environment. Because the Morsen MAX12 can go up to 3600W it’s good that it has one of these in it which means you can rest assured that it won’t overheat your plants.

Do LED Lights Actually Work? What are Their Advantages?

Yes, LED lights actually work very well with cannabis plants and are great for quite a few reasons. The first one is that they are energy-efficient. You won’t need to worry about them racking up your electric bill or overheating. Another reason is that they come with a wide color spectrum. Growing cannabis (or any type of plant) means you need to have a grow light that has a variety of colors built into it. The Morsen MAX12 has almost every type of light color that LED lights offer which means your plants will grow well. The red, blue, UV, and IR light chips will help your plants through their various growth stages so they grow well. LED lights are often brighter and wider which means they can reach more areas on your plants. Your plants will be covered everywhere by the LED lights which means they will be warm and grow evenly.

Besides these reasons, LED lights often use less space. The Morsen MAX12 measures only 5.9 x 15.9 x 21.8 inches which means it won’t be a large and bulky item that takes up a lot of your growing space. These can be very beneficial to use, especially in places that are small.

The last reason LED lights are useful to use when growing cannabis is that they can be dimmed. As you read in the Morsen MAX12 product review, it comes with an on/off dimmer switch. This switch will allow you to instantly turn the lights on or off without problems. Many other lights often don’t have this feature which means they can take a while to heat up and cool down. The Morsen MAX12 has this great feature which makes it safe and easy to use in your growing space.

Conclusion

The Morsen MAX12 is a great LED light panel that will help you grow healthy and strong plants. If you’re searching for an LED light panel to use on your cannabis plants, you’ll definitely want to consider this one. It’s built with many helpful features which will make sure your plants not only stay warm, but grow quickly. The Morsen MAX12 is something every cannabis grower should certainly look into investing in.

 

Leave a Reply

WordPress Security